Selective plating is accomplished using intricate masking employing various plug, tape and “paint on” mask systems designed to meet the most stringent OEM requirements. Complex masking with tight tolerances is where our experienced team excels.
In a perfect world we would always have clean parts ready to be processed. In reality, we receive parts that require special pretreatments, such as blasting, to remove scales and oxides as result of manufacturing, welding and heat treatment. We use a variety of different medias, depending on the severity of the contaminant, the dimensional tolerances and specific surface finishes detailed on the print.
From small parts that can be bulk processed to larger pieces requiring special handling, Wolkerstorfer is prepared to accommodate your requirements.
Walk-In Blast Room: 12 feet wide x 15 feet long x 15 feet high
Hand Blast Cabinets: 28 inches wide x 48 inches long x 24 inches high
Tumble Blaster: 10 inches wide with a 24 inch diameter drum